Make a donation

Author Topic: S3 Intercooler Installation  (Read 2526 times)

Offline DMackie

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 80
    • Email
S3 Intercooler Installation
« on: March 14, 2017, 10:50:30 am »
Hi

I have bought an S3 intercooler as an upgrade for my GTI. I just wanted to know which hoses i should get an if i require different bolts/screws to fit it?

I have found a hose kit from darkside. Is this the best option.

Part numbers would be great thanks.

DMackie

Offline v4rley

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 104
  • Posts: 1026
Re: S3 Intercooler Installation
« Reply #1 on: March 14, 2017, 11:01:39 am »
Is it the alloy end tanks? If so you need to get some M6x16 bolts

Also re the hoses have a read here:
http://forums.vwvortex.com/#/topics/5158183?page=1

Offline DMackie

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 80
    • Email
Re: S3 Intercooler Installation
« Reply #2 on: March 14, 2017, 11:20:43 am »
Yea it is one with the alloy ends. Thanks for the link, will check it out.

Offline GTI_Kyle

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 4
  • Posts: 140
    • Email
Re: S3 Intercooler Installation
« Reply #3 on: September 27, 2017, 04:06:49 pm »
which hoses did you for in the end mate? Fitting one to my cupra soon.


Stage 2 Graphite Blue DSG GTi - Too many mods to list...

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 670
  • Posts: 8228
Re: S3 Intercooler Installation
« Reply #4 on: October 03, 2017, 10:35:04 am »
You can use the standard hoses.  Just need to cut the bayonet fittings off the end of each pipe, which can be done with a pair of side cutters in a matter of minutes.  You will need a couple of hose clamps as well.



2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline patpong_pete

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 9
  • Posts: 313
Re: S3 Intercooler Installation
« Reply #5 on: October 03, 2017, 06:44:15 pm »
how long does or would it take to fit an s3 alloy intercooler
about 30 mins or more like 1 hour thanks in advance

and do you have to order these M6x16 bolts

Offline v4rley

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 104
  • Posts: 1026
Re: S3 Intercooler Installation
« Reply #6 on: October 03, 2017, 07:03:00 pm »
Well depends how handy you are but took longer than 1 hr you have to remove the whole front end. Yes need the m6x16mm get some from eBay.