Make a donation

Author Topic: AWD gearbox options  (Read 1693 times)

Offline DeWet

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 30
AWD gearbox options
« on: October 06, 2018, 07:25:39 am »
With my BWA engine conversion finally done I'm now looking to do my AWD conversion. I know its a lot of eork and thr gains might be little compared to a properly setup FWD but its a nice challenge for me ;)

Someone told me that the mk1 TT box will bolt straight on but I'm also trying to find out if the mk6 R manual box will fit.

The code is KZV and the newer gear ratios and diff must be better than the TT box?

Can anyone shed more light on this for me?

Sent from my SM-N920I using Tapatalk


Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 672
  • Posts: 8233
Re: AWD gearbox options
« Reply #1 on: October 06, 2018, 01:23:37 pm »
Golf 6R, 8P S3 or TT-S manual boxes will all fit.


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline DeWet

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 30
Re: AWD gearbox options
« Reply #2 on: October 07, 2018, 02:57:24 am »
Golf 6R, 8P S3 or TT-S manual boxes will all fit.
Great thanks.....is there much difference between their gear ratios and transfer cases?

Sent from my SM-N920I using Tapatalk


Offline DeWet

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 30
Re: AWD gearbox options
« Reply #3 on: October 15, 2018, 06:19:32 am »
I found a manual S3 box. Would I need to replace flywheel and clutch to fit or will it work with stock gti flywheel and clutch?

Sent from my SM-N920I using Tapatalk


Offline DeWet

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 30
Re: AWD gearbox options
« Reply #4 on: October 17, 2018, 11:19:43 am »
My BLX engine config seems to be running the 228mm diameter clutch unlike BWA's 240 which should be the same as the S3 :(
So will try and find flywheel and clutch for this and hope it fits my crankshaft

Any idea if I need different driveshaft on the transfer case's side?

Sent from my SM-N920I using Tapatalk