Make a donation

Author Topic: heated seat retro fit  (Read 1897 times)

Offline stuupnorth

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 3
  • Posts: 181
    • stuupnorth
    • Email
heated seat retro fit
« on: November 20, 2009, 06:09:38 pm »
Hi guys
I was just wondering if it is possible to retro-fit
heated seats to my gti
I've seen elements/pads for mk4 on e-bay which are gen vw parts
any help/suggestions?

Cheers
Stu

Offline edd666999

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 24
  • -Receive: 89
  • Posts: 2730
    • Email
Re: heated seat retro fit
« Reply #1 on: November 20, 2009, 06:11:33 pm »
i asked this, i think the answer was the heater pads are built into the seat cover rather than a pad u can buy....also you need to make sure you have the loom installed.

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7834
  • ED30 No.1412
    • Email
Re: heated seat retro fit
« Reply #2 on: November 20, 2009, 09:06:24 pm »
+1 you'd be better off buying the entire seats but then you'd have to wire in the heater controls too.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline ollie288

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 21
  • -Receive: 13
  • Posts: 910
    • Email
Re: heated seat retro fit
« Reply #3 on: November 22, 2009, 05:26:22 pm »
I have bought the heat gti seats and the loom of kufatec. They are easy enough to do but I am unsure of a few wire locations and kufatec wont help so it doesn't work at the moment!  :sad1:

Offline golfman

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 17
  • -Receive: 33
  • Posts: 1088
  • If your not first your last!!!
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,69645.0.html
Re: heated seat retro fit
« Reply #4 on: November 23, 2009, 11:07:07 am »
I have bought the heat gti seats and the loom of kufatec. They are easy enough to do but I am unsure of a few wire locations and kufatec wont help so it doesn't work at the moment!  :sad1:
Hi ollie i bought 2 tpms looms from kufatec and neither of them work with my car and to be honest kufatec were about as much help to me as they were to you :mad: :mad:
all they care about is getting your money,if there looms only work with certain controllers they should state that on the item info  :fighting:

sorry for being off topic but i just hate being ripped off!!!

golfman

Modded The Way I Like It!!!!!!
Vag-com Hex+Can in scotland
I Hate Timewasters...

Offline ollie288

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 21
  • -Receive: 13
  • Posts: 910
    • Email
Re: heated seat retro fit
« Reply #5 on: November 23, 2009, 04:04:11 pm »
Hi Golfman, I know what you mean they are helpful when you express an interest in buying the products but as soon as I received it they have been no help. Interesting to know it is not only me how is experiencing a bad service! I am about to buy the xenon self levelers off them but I am thinking what if they do this again!
I noticed your thread on golfmk5 about wanting xenons. I have seen a few sets on ebay at minute dont know if you have seen them. Defiantly worth getting I am really pleased with mine!
Cheers
Ollie :happy2: