MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Cosmetic/Interior Modifications => Topic started by: Mitch1980 on January 03, 2017, 01:58:21 pm
-
Hi Iv just received my gloss black wrap for the dsg surround as mine is scratched any help on T-Mobile safely Iv pulled it up for a quick look but there's the wire connected and how do u remove from the area to wrap thanks for any help
-
If you lift up the surround you'll see that the wire is connected to a lil connector, you just need to pry the lil clip on the connector inwards and pull gently. It may need a bit of persuasion but this goes without saying be careful you don't break it.
Mine was a bugger, I used a lil jewellers screwdriver carefully to help take it off. Good luck
-
So it just basically pulls out then unclip the wire, that's it?
-
How's it going Mitch, got mine off last night, no idea how to get the gaiter off so unclipped it.
I've taken all the rubbery black paint off and scoured the surface a little, got it on but got some annoying creases in it near the D button so will probably take it off and have another go.
-
The whole thing can be taken apart including the silver surround so you are left with only the black plate.
I just scotched mine, plastic primed it and painted it matt black. Looks factory fresh :happy2:
-
Yeah mine is completely stripped down but wanted the carbon look to go with the stereo surround when I do that :signLOL:
-
To be honest i was going to do mine graphite grey along with the astray surround and cover but i couldn't be arsed as i had already spent ages fitting my boost gauge in the ashtray :happy2:
-
Thanks fellas Iv been busy with other mods but il give it a go next weekend and hope for the best if it goes bad il just look into spraying thanks
-
How do you do the holes :doh: :doh:
-
How do you do the holes :doh: :doh:
Lol I struggled with them too at first
Hopefully it makes sense when I try and explain this
I used a sharp scalpel that fits into the hole and attacked them via the back. Cut an "X" into the hole first then insert the scalpel about half way from the back and cut in circular motion, almost like your trying to scrap the "side" of the hole....obviously have to take "gear indicator" thing off.
Takes a bit of patience and practice. Heat and sharp scalpel will be your best friends here!
-
Cheers, I've ordered a craft knife kit so I'll attempt it then lol
-
Cheers, I've ordered a craft knife kit so I'll attempt it then lol
Happy to help
Do show the result when done, good luck lol
-
I've got the rest done, just need to do the holes :surprised:
-
Not a great pic in the car but you get the idea, a lot easier with a set of craft blades :signLOL: :signLOL:
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fqq329%2Fspwd%2F7d5d0fd0-fe84-44ed-8585-cc54dea1644c.jpg&hash=1745b98b100de0816962ff8cc303b0a2e5f7a825)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fqq329%2Fspwd%2FIMG_5080.jpg&hash=df62d81254bc93efdb7370d94d16f0a40d0af061)
-
Not a great pic in the car but you get the idea, a lot easier with a set of craft blades :signLOL: :signLOL:
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fqq329%2Fspwd%2F7d5d0fd0-fe84-44ed-8585-cc54dea1644c.jpg&hash=1745b98b100de0816962ff8cc303b0a2e5f7a825)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fqq329%2Fspwd%2FIMG_5080.jpg&hash=df62d81254bc93efdb7370d94d16f0a40d0af061)
-
Really like that - all the soft touch plastic is far too easy to scratch!!
Are you planning on doing the door card handles?
-
I don't like the idea of taking the door card off so probably not, I might just buy the drivers side one
-
Also done mine recently, was fed up of the scratched pikey look.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2FStarlet01%2FMobile_Uploads%2F9BF6AFEA-EC30-4122-B0BF-9C498E1187E9.jpg&hash=4357aeb7adb3fda1dcd69ddb916705eb6bcfce07)
-
who wants to do mine :laugh:
-
These look so fresh.
What's the removal procedure? Most likely paint mine matt/satin black.
Is it just a case of prying up the surround, disconnecting the connector and taking off the silver surround with the letters? What about the gaiter?
Thanks