All Things Mk5 > Performance Modifications

Rear PCV

<< < (5/5)

jay26r:

--- Quote from: Dan_FR on May 22, 2016, 12:24:20 am ---What kit have you got? Not got any pics to hand but can take one tomorrow if I remember

--- End quote ---

42 draft designs kit

jay26r:

--- Quote from: xjscx on May 22, 2016, 11:10:17 am ---I have a similar question.

Can I do this:

Blank both rear rocker cover breather and coming off the turbo



Blank Intake manifold breather



And this is the part I'm not sure about. Use the pcv delete to vent to atmosphere? and vent the pipe coming from under the intake manifold?  :rolleye:


--- End quote ---

One of those ( one on the right hand side as you looking at it head on) on the back of the cam cover is for the evap , 

Dan_FR:
You can use the 42DD catch can plate to make your own PCV vent to atmosphere setup using nothing more than a few silicone bends, few metres of pipe and a couple of silicone bungs for the catch can plate...... That's what I've done with mine as I already had the kit and didn't want to spend a further £120odd quid on the R-Tech kit

jay26r:

--- Quote from: Dan_FR on May 24, 2016, 07:43:20 am ---You can use the 42DD catch can plate to make your own PCV vent to atmosphere setup using nothing more than a few silicone bends, few metres of pipe and a couple of silicone bungs for the catch can plate...... That's what I've done with mine as I already had the kit and didn't want to spend a further £120odd quid on the R-Tech kit

--- End quote ---

could you post some pics of yours and how its done for reference please

Navigation

[0] Message Index

[*] Previous page