General > Detailing

Machine polish - what would you pay?

<< < (3/4) > >>

white91:
You cannot do all that in three hours, but for £150 what do you expect


Sent from my iPhone using Tapatalk

shail:

--- Quote from: white91 on December 10, 2015, 01:19:34 pm ---You cannot do all that in three hours, but for £150 what do you expect


Sent from my iPhone using Tapatalk

--- End quote ---

Yep, figured as much.  I assume he'll just give it the once over with a machine after washing it. 

Eccie:

--- Quote from: shail on December 10, 2015, 01:36:08 pm ---
--- Quote from: white91 on December 10, 2015, 01:19:34 pm ---You cannot do all that in three hours, but for £150 what do you expect


Sent from my iPhone using Tapatalk

--- End quote ---

Yep, figured as much.  I assume he'll just give it the once over with a machine after washing it.

--- End quote ---

Chances are it'll be worse than when you took it in and It'll cost you a lot to get it put right.

I'd look for someone good and not settle for third rate work

dansmith180:
You can't do anything in 3 hours, it takes me that long to clean/ decontaminate and towel then blow dry a car before I even pick up a polisher.

For that money just buy a DAS6 polisher and some pads etc... And do it yourself and you'll do a better job and can do it regularly.

shail:

--- Quote from: Eccie on December 11, 2015, 04:28:33 pm ---
--- Quote from: shail on December 10, 2015, 01:36:08 pm ---
--- Quote from: white91 on December 10, 2015, 01:19:34 pm ---You cannot do all that in three hours, but for £150 what do you expect


Sent from my iPhone using Tapatalk

--- End quote ---

Yep, figured as much.  I assume he'll just give it the once over with a machine after washing it.

--- End quote ---

Chances are it'll be worse than when you took it in and It'll cost you a lot to get it put right.

I'd look for someone good and not settle for third rate work

--- End quote ---

That's my biggest concern.  Might give it a miss and look at doing it myself in the spring. 

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version