All Things Mk5 > Sat Nav and Car Audio

RNS510 Firmware Upgrade Dealer/Supplier

<< < (7/19) > >>

mortygttdi:
Carl whats the difference with the new 2680 f/w I have it on my netbook ready to burn onto disc but didn't really know if there was much difference.

Darren

vRS Carl:
The main differences are:

1. Firmware is a Factory Firmware Release version not a Beta
2. Reformats the HDD and updates the way it is addressed (hence the speed increase that is noticed by most ppl)
3. Better support for SDHC (now properly supports 32GB before some people had problems over 16GB cards)
4. Fixed Regensburg Syndrome. Will change back to your location within a couple of seconds (will depend on how good your antenna is and location but everyone who i have done the Upgrade for says it changes within about 2 secs.)
5. Fixed Battery drain issue
6. Correct support for MFSW
7. Correct support for Voice Control (it is hit an miss on 266X) It's now an option in the Setup menu & Voice Tag option is also an option when saving addresses
8. Fixed MP3 issue for HDD playback
9. Better response to touchscreen input
10. Different graphical displays for HDD capacity and copying to HDD

They are the main ones that i can remember off the top of my head.

You will notice when you first start it up after flashing it's all in german (language etc) however it is very easy to correct and put into english. After that even if battery is disconnected and left off overnight it starts up in english.

Carl :happy2:

SteveP:
Any links for the download of the firmware???

mortygttdi:
Cheers Carl I'm burning a copy has we speak :happy2:  Is the speed limitation okay doesn't change it to kph does it? also never have a prob with ther german thing but I also have the A4/Q7 extended antenna the long shark fin one :wink:

Darren

vRS Carl:
The Speed will only be in KMH if you have an altered disc (BMW Maps or Speed Cams)

Links are:

For unmodified version

http://www.megaupload.com/?d=E4ENUHO7

Password is: new_fw

For Modified version you will need to do it yourself or just use VCDS to enable test menu

Be aware i accept no liability if anything goes wrong. You do this at your own risk

Carl :happy2:

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version