All Things Mk5 > Members Rides
R5GTT'S Cars rapid
r5gtt:
--- Quote from: AJP on January 20, 2017, 07:51:22 pm ---You'll be fine with that then. Maybe a tiny bit of pressure drop but it shouldn't be enough to cause any really noticeable lag.
--- End quote ---
yeah I wouldn't have thought it would as many gti owners are or have fitted them to st2 + cars so can't be a bad thing.
I can't believe you thought I'd be doubling it up with my oem one :signLOL:
AJP:
--- Quote from: r5gtt on January 20, 2017, 07:59:45 pm ---
--- Quote from: AJP on January 20, 2017, 07:51:22 pm ---You'll be fine with that then. Maybe a tiny bit of pressure drop but it shouldn't be enough to cause any really noticeable lag.
--- End quote ---
yeah I wouldn't have thought it would as many gti owners are or have fitted them to st2 + cars so can't be a bad thing.
I can't believe you thought I'd be doubling it up with my oem one :signLOL:
--- End quote ---
I never read threads properly!
Make sure you do a little write up of the fitting. I might follow suit if there's not too much 'custom fabrication' involved...
r5gtt:
--- Quote from: AJP on January 20, 2017, 08:02:32 pm ---
--- Quote from: r5gtt on January 20, 2017, 07:59:45 pm ---
--- Quote from: AJP on January 20, 2017, 07:51:22 pm ---You'll be fine with that then. Maybe a tiny bit of pressure drop but it shouldn't be enough to cause any really noticeable lag.
--- End quote ---
yeah I wouldn't have thought it would as many gti owners are or have fitted them to st2 + cars so can't be a bad thing.
I can't believe you thought I'd be doubling it up with my oem one :signLOL:
--- End quote ---
I never read threads properly!
Make sure you do a little write up of the fitting. I might follow suit if there's not too much 'custom fabrication' involved...
--- End quote ---
Read the flipping thread :doh: the write up part will be a pain as it's a lengthy fabrication process when doing out on the road so to speak :sad1:
Will see what happens in any case.
v4rley:
Wow! Never seen the front panel removed to do that job :thinking:
Wouldn't it have been easier and more beneficial to remove the inlet manifold and have done the valves therefore achieving 3 jobs :P
r5gtt:
--- Quote from: v4rley on January 23, 2017, 04:03:17 pm ---Wow! Never seen the front panel removed to do that job :thinking:
Wouldn't it have been easier and more beneficial to remove the inlet manifold and have done the valves therefore achieving 3 jobs :P
--- End quote ---
I removed it to replace the broken front panel dude :doh:
Let me tell you that it's a beech to replace this and to take the inlet off it's another pain in the ass.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version