All Things Mk5 > Performance Modifications
Revo SPS settings
jasam:
I would like to know, if knock sensor senses something (in case lets say -3 degree pull) or its real knock. I doubt revo will reply on that question :/
Dan_FR:
It's not Revo you would need to ask, its Bosch...
Its really irrelevant whether it is actual knock or not, as theres nothing you can do about it regardless
jasam:
If its not real knock, I will put more timing, if it is real knock its not for play with that , that difference
Dan_FR:
Follow the Revo guide for acceptable level of timing correction, they are quite clear on what is OK and what is not. Anything up to around 5 is ok as it still leave headroom to pull back if needed, but also to take advantage of cooler temperatures too
The point I think you are missing is that even if you add more timing request, if you were already seeing 3 degrees of correction before, you will simply be increasing this to 4-6 degrees of correction - this will not result in an increase in performance at that RPM... Only at load sites where you previously had no timing correction
If you look at the actual ignition timing, it will not advance
https://products.revotechnik.com/products/pdf/SelectPlus_AdvancedUserGuide_V0707.pdf
jasam:
Will check that. Did you mean injector advance or timing advance?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version