General > Random Chat
Yet another job interview closer to home tomorrow
r5gtt:
Yes mate, I used a pry bar Thompson local directory and rag to push a dent out :signLOL:
Let me ask you ad you've most like seen the inner of the tail gate.
next to the rear wiper motor rhs there's a plate bonded on, what the heck is that for as I would have pushed that dent out in 10 seconds had that plate not been there.
I've done some body damage repairs to a seat leon front side and rear. skoda vrs side B post door and sill damage. Nissan front chop job and many more so yes I have dabbled on that side of repairs.
TAPPY:
--- Quote from: r5gtt on May 29, 2016, 11:30:05 am ---Yes mate, I used a pry bar Thompson local directory and rag to push a dent out :signLOL:
Let me ask you ad you've most like seen the inner of the tail gate.
next to the rear wiper motor rhs there's a plate bonded on, what the heck is that for as I would have pushed that dent out in 10 seconds had that plate not been there.
I've done some body damage repairs to a seat leon front side and rear. skoda vrs side B post door and sill damage. Nissan front chop job and many more so yes I have dabbled on that side of repairs.
--- End quote ---
I believe the bit your on about is a strengthening plate which joins the inner tailgate to the outer iirc.
You probably know more than me lol
r5gtt:
--- Quote from: TAPPY on May 29, 2016, 12:52:59 pm ---
--- Quote from: r5gtt on May 29, 2016, 11:30:05 am ---Yes mate, I used a pry bar Thompson local directory and rag to push a dent out :signLOL:
Let me ask you ad you've most like seen the inner of the tail gate.
next to the rear wiper motor rhs there's a plate bonded on, what the heck is that for as I would have pushed that dent out in 10 seconds had that plate not been there.
I've done some body damage repairs to a seat leon front side and rear. skoda vrs side B post door and sill damage. Nissan front chop job and many more so yes I have dabbled on that side of repairs.
--- End quote ---
I believe the bit your on about is a strengthening plate which joins the inner tailgate to the outer iirc.
You probably know more than me lol
--- End quote ---
That's correct I just didn't know the correct terminology lol
I swear if I had a circular air saw or electric I would have chopped it out as the dent was more important to get out than a silly reinforcement plate :signLOL:
TAPPY:
Haha but then the dent prob wouldn't have stayed out lol
r5gtt:
Why not the plate is more or less fooked it as I couldn't get it back to stick as it was heavily bonded but came off with a ping :signLOL:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version