All Things Mk5 > How to Guides / Troubleshooting

Bled brakes and clutch now clutch pedal has no pressure n hits floor

<< < (2/3) > >>

Johnsy:
Doing the whole job again, can only think the resivour has got low and pulled air through

r5gtt:

--- Quote from: rich83 on May 30, 2016, 03:50:11 pm ---My guess is you are not bleeding the clutch correctly.

--- End quote ---
I agree

Johnsy:
Educate me please!

Resivour cap off , vacuum on bleed nipple , turn on suction ,crack open nipple keeping res full , close nipple before removng vacuum

rich83:
I thought you were supposed to do it by pumping the clutch pedal?

Johnsy:

--- Quote from: rich83 on May 30, 2016, 04:20:17 pm ---I thought you were supposed to do it by pumping the clutch pedal?

--- End quote ---

I think the problem is I assumed the fluid level should be where the seam is on the resivour, I couldn't see a level indicator so iv let the fluid drop to near the bottom of the yellow strainer, keeping the fluid level at the top it so I think letting it drop has passed the clutch pick up , I could be wrong but hey ho, sorted now

Navigation

[0] Message Index

[#] Next page

[*] Previous page