Author Topic: Highline CECM with ambient light and OEM footwell led support  (Read 4076 times)

Offline Pashka

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 7
  • -Receive: 46
  • Posts: 638
    • Email
Highline CECM with ambient light and OEM footwell led support
£45.00
Single Image
    Location: Leeds
    Postage: £0.00
    Delivery Only

    Highline 30 bit CECM for sale. Supports bixenons, fog lights, cornering fogs function. Also supports ambient light while driving and OEM footwell leds (must be wired all 4 to not get fault).
    65 delivered plus fees or a gift if paying via PayPal.
    « Last Edit: September 30, 2016, 10:18:40 PM by Pashka »
    06 1.9 TDI Owner. Retrofits: Bixenons, Drls, Full GT/GTI exterior, RNS510+MDI+Premium Bluetooth+RVC+OPS, Full Fis, MFSW, Cruise control, TPMS, Polar Fis, Boot pop up and more.. :)
    Coding, diagnostic and retrofits in Leeds
    Pre coded Can Gateways for battery drain issues with RNS510 and similar headunits
    Premium Bluetooth modules/kit
    RNS510 Service - codes, maps/firmware updates
    Latest V8 West EU maps update service for RNS315

    Offline Pashka

    • Won't Shut up.
    • *****
    • Thank You
    • -Given: 7
    • -Receive: 46
    • Posts: 638
      • Email
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #1 on: June 30, 2016, 10:41:46 AM »
    1 left.
    06 1.9 TDI Owner. Retrofits: Bixenons, Drls, Full GT/GTI exterior, RNS510+MDI+Premium Bluetooth+RVC+OPS, Full Fis, MFSW, Cruise control, TPMS, Polar Fis, Boot pop up and more.. :)
    Coding, diagnostic and retrofits in Leeds
    Pre coded Can Gateways for battery drain issues with RNS510 and similar headunits
    Premium Bluetooth modules/kit
    RNS510 Service - codes, maps/firmware updates
    Latest V8 West EU maps update service for RNS315

    Offline bluebert92

    • Always Involved
    • ****
    • Thank You
    • -Given: 10
    • -Receive: 27
    • Posts: 293
      • Email
    • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,100025.msg982250.html#msg982250
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #2 on: July 29, 2016, 12:24:45 AM »
    does this support MFSW and cruise do you know?

    Offline RetroRaz

    • Just look at my post count
    • ******
    • Thank You
    • -Given: 37
    • -Receive: 204
    • Posts: 2808
      • Email
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #3 on: July 29, 2016, 09:36:14 AM »
    does this support MFSW and cruise do you know?
    You can use any cecm for mfsw and cruise. What you do need is a highline steering wheel control module.

    Sent from my SM-G928F using Tapatalk


    Offline Pashka

    • Won't Shut up.
    • *****
    • Thank You
    • -Given: 7
    • -Receive: 46
    • Posts: 638
      • Email
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #4 on: September 30, 2016, 12:15:01 PM »
    On sale  :signLOL: 45 delivered. 1 left.
    06 1.9 TDI Owner. Retrofits: Bixenons, Drls, Full GT/GTI exterior, RNS510+MDI+Premium Bluetooth+RVC+OPS, Full Fis, MFSW, Cruise control, TPMS, Polar Fis, Boot pop up and more.. :)
    Coding, diagnostic and retrofits in Leeds
    Pre coded Can Gateways for battery drain issues with RNS510 and similar headunits
    Premium Bluetooth modules/kit
    RNS510 Service - codes, maps/firmware updates
    Latest V8 West EU maps update service for RNS315

    Offline v4rley

    • Just look at my post count
    • ******
    • Thank You
    • -Given: 30
    • -Receive: 116
    • Posts: 1026
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #5 on: September 30, 2016, 12:43:32 PM »
    Bargain  :happy2:

    Offline croak2012

    • Always Involved
    • ****
    • Thank You
    • -Given: 10
    • -Receive: 4
    • Posts: 156
    • My first Gti mk5
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #6 on: October 07, 2016, 10:15:15 AM »
    I'm going to retrofit oem xenons - Just checking that when I wire  in the bi xenons I don't get any surprises?
    I already have fog lights  so I take it I have highline  central electronics control module already installed and don't need to buy this?
    thanks

    Offline RetroRaz

    • Just look at my post count
    • ******
    • Thank You
    • -Given: 37
    • -Receive: 204
    • Posts: 2808
      • Email
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #7 on: October 07, 2016, 10:17:51 AM »
    I'm going to retrofit oem xenons - Just checking that when I wire  in the bi xenons I don't get any surprises?
    I already have fog lights  so I take it I have highline  central electronics control module already installed and don't need to buy this?
    thanks

    If you already have fogs then you already have high end CECM.

    However, this one has cornering fogs and stay on footwell lights :)

    Offline croak2012

    • Always Involved
    • ****
    • Thank You
    • -Given: 10
    • -Receive: 4
    • Posts: 156
    • My first Gti mk5
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #8 on: October 07, 2016, 10:34:46 AM »
    I'm going to retrofit oem xenons - Just checking that when I wire  in the bi xenons I don't get any surprises?
    I already have fog lights  so I take it I have highline  central electronics control module already installed and don't need to buy this?
    thanks

    If you already have fogs then you already have high end CECM.

    However, this one has cornering fogs and stay on footwell lights :)
    gaaaaawd! .... there's always sumfink else ... innit! ... so whats this "cornering fog " malarkey all about!  :confused: 

    Offline RetroRaz

    • Just look at my post count
    • ******
    • Thank You
    • -Given: 37
    • -Receive: 204
    • Posts: 2808
      • Email
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #9 on: October 07, 2016, 10:42:52 AM »
    gaaaaawd! .... there's always sumfink else ... innit! ... so whats this "cornering fog " malarkey all about!  :confused:

    so when you turn left or right, the fogs come on depending what side you turn (Something like that)

    Offline croak2012

    • Always Involved
    • ****
    • Thank You
    • -Given: 10
    • -Receive: 4
    • Posts: 156
    • My first Gti mk5
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #10 on: October 07, 2016, 10:54:21 AM »
    gaaaaawd! .... there's always sumfink else ... innit! ... so whats this "cornering fog " malarkey all about!  :confused:

    so when you turn left or right, the fogs come on depending what side you turn (Something like that)
    i heard about this - does this functionality extend to the main xenons too?

    Offline RetroRaz

    • Just look at my post count
    • ******
    • Thank You
    • -Given: 37
    • -Receive: 204
    • Posts: 2808
      • Email
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #11 on: October 07, 2016, 10:57:58 AM »
    dont think so buddy

    Offline croak2012

    • Always Involved
    • ****
    • Thank You
    • -Given: 10
    • -Receive: 4
    • Posts: 156
    • My first Gti mk5
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #12 on: October 07, 2016, 01:03:02 PM »

    Offline RetroRaz

    • Just look at my post count
    • ******
    • Thank You
    • -Given: 37
    • -Receive: 204
    • Posts: 2808
      • Email
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #13 on: February 07, 2017, 11:00:45 PM »
    Pashka u still have this?  Does it not need to be a 3C8 part number for ambient footwell lighting?

    Sent from my SM-G928F using Tapatalk


    Offline v4rley

    • Just look at my post count
    • ******
    • Thank You
    • -Given: 30
    • -Receive: 116
    • Posts: 1026
    Re: Highline CECM with ambient light and OEM footwell led support
    « Reply #14 on: February 08, 2017, 06:34:34 AM »
    Pashka u still have this?  Does it not need to be a 3C8 part number for ambient footwell lighting?

    Sent from my SM-G928F using Tapatalk

    It is 3C8  :laugh: