All Things Mk5 > Superchips Zone

*** All your bluefin/superchips questions and answers in here please.

<< < (45/107) > >>

illyun:

--- Quote from: garethmk1 on January 11, 2009, 07:06:27 pm ---Reconnected bluefin to d/load DTC's - getting fault code P0300, P0303 and P0302 - translate as :-

P0303 : Fault Cyl D-Misfire Detected (CYL 3)

P0302 : Fault Cyl B-Misfire Detected (CYL 2)

P0300 : Random/Multiple Cyl Misfire Detected


Do I reload to stock map as leaving for work at 2100 or ..... shall I drive tonight and contact superchips first thing tomorrow morn ?

Regards,

Gareth


--- End quote ---


Thats one of the problems you get if you order an 'off-the-shelf' remap... its why I went with Revo and had JKM install it.  I seem to recall Keith from JKM saying something about a cylinder misfiring or something but that it wasn't serious and that they had adjusted the settings to take care of it.  Never had a problem with my Revo map.  Of course, you could get a tuner to install the SC remap and again, I'm sure that would be better than remapping your ecu on your own.  Ready for the  :fighting: from SC owners  :grin: :grin: :grin: :grin:

Hedge:
I think part of the attraction of the Superchips Bluefin is that it is an 'off the shelf' diy remap.

The interesting thing now is how Superchips deal with any perceived problems with the map once Gareth speaks to them.

And yes I am a very interested party. :wink:

182_blue:

--- Quote from: illyun on January 12, 2009, 01:22:47 am ---
--- Quote from: garethmk1 on January 11, 2009, 07:06:27 pm ---Reconnected bluefin to d/load DTC's - getting fault code P0300, P0303 and P0302 - translate as :-

P0303 : Fault Cyl D-Misfire Detected (CYL 3)

P0302 : Fault Cyl B-Misfire Detected (CYL 2)

P0300 : Random/Multiple Cyl Misfire Detected


Do I reload to stock map as leaving for work at 2100 or ..... shall I drive tonight and contact superchips first thing tomorrow morn ?

Regards,

Gareth


--- End quote ---


Thats one of the problems you get if you order an 'off-the-shelf' remap... its why I went with Revo and had JKM install it.  I seem to recall Keith from JKM saying something about a cylinder misfiring or something but that it wasn't serious and that they had adjusted the settings to take care of it.  Never had a problem with my Revo map.  Of course, you could get a tuner to install the SC remap and again, I'm sure that would be better than remapping your ecu on your own.  Ready for the  :fighting: from SC owners  :grin: :grin: :grin: :grin:

--- End quote ---

i posted a link earlier where a Revo owner had the same issue  :happy2: :laugh:

illyun:

--- Quote from: 182_blue on January 12, 2009, 08:53:31 am ---i posted a link earlier where a Revo owner had the same issue  :happy2: :laugh:

--- End quote ---

I know.  I had issues too when JKM put the Revo map on and they were sorted immediately though.  Moral of the story is to get your car mapped by a competent garage/technican.

Greeners:

--- Quote from: illyun on January 12, 2009, 09:41:38 am ---
--- Quote from: 182_blue on January 12, 2009, 08:53:31 am ---i posted a link earlier where a Revo owner had the same issue  :happy2: :laugh:

--- End quote ---

I know.  I had issues too when JKM put the Revo map on and they were sorted immediately though.  Moral of the story is to get your car mapped by a competent garage/technican.

--- End quote ---

If people have had 'problems' they have always been quick to come straight back and report how pleased they were with SC's customer service. Don't believe everything you read Illyun. I've never had a REVO map and I for one would not knock REVO or anyone that chose to use it.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version