All Things Mk5 > How to Guides / Troubleshooting

Drivers door gap

(1/2) > >>

Craig Stanley:
Hi. Can anyone help me. My drivers door has about a 5mm gap at the top wher the rubber on the door meets the roof. It aligns perfectly all around the door but just doesnt seal at this point. If I push on it at the top corner it closes the gap. Is there anyway to adjust it like bend it or something or am I best taking it into a bodyshop. Cheers


Sent from my SM-N910F using Tapatalk

Andy:
Years ago you put the window down and pulled the top of the door in but the golf doors are pretty strong and you have to watch you don't crack the paint

Craig Stanley:
I did think of doing that. Might have a crack at it tomorrow as there is no paint on the top section apart from on the inside. Cheers

Sent from my SM-N910F using Tapatalk

r5gtt:
Be careful when pulling as you don't want to snap the frame.

ChazGTI:
It might be an idea to undo the bolts and try realigning the door (with help) , I need to do that on mine as the lower part of the door catches the door still ever so slightly. Not sure if it's that simple though.

Navigation

[0] Message Index

[#] Next page