All Things Mk5 > How to Guides / Troubleshooting

Xenon Auto-Leveling Sensor

<< < (3/4) > >>

apples12:

--- Quote from: Type_R on June 19, 2012, 05:31:42 pm ---
--- Quote from: higher1 on June 19, 2012, 05:26:57 pm ---
--- Quote from: Type_R on June 19, 2012, 05:23:11 pm ---Sorry to bump an old thread. Can anyone circle the front sensor for me, I can't see where it is exactly on the photo above.

Also as I have an open to short on VAG COM on my front leveller can someone post a photo of where the connector attaches to the sensor please.

--- End quote ---

its not in the photo as that shows the rear sensor im pretty sure your front sensor is attached to the nearside front wishbone/bottom arm

--- End quote ---

Thanks, I was thinking I was missing something!

Would it be possible for me to get to it without jacking the car up?

--- End quote ---

full lock the wheel all the way to the right, and you'll at least be able to see the sensor to see if theres any physical damage...

Type_R:
Thanks thats really useful. Will give that a go tomorrow to see if I can see if the cable is connected.

markfive:
NSF wheel needs to come off but then the sensor is readily accessible. Pic attached - I've circled the sensor in red, and the cable with the blue arrow is the connector for it (not connected in this pic)

Type_R:
Thanks mark five!  :happy2:

Just turned the wheel to full lock and visually inspected the sensor. All looks well attached and the cable is connected, although I think I will have to get the wheel off to disconnect and reconnect it and see if that makes a difference.

alfboden:
Sorry to dig up an old thread. Does anyone know the cost of a replacement arm?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version