Make a donation

Author Topic: 034 Street Density Engine Mounts  (Read 6487 times)

Offline colesey

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 6
  • -Receive: 89
  • Posts: 1019
034 Street Density Engine Mounts
« on: September 14, 2016, 06:32:15 am »
I am considering the 034 Street Density engine mounts to join the existing VWR lower mount on my revo stage 1 car in the hope of reducing the pendulum rocking of the engine.  Has anyone here used these mounts? I was hoping for some feedback on their effectiveness and impact upon NVH in daily driving. Alternatively, are there other brands more suitable for road use?

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 801
  • Posts: 13443
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=ppovit5jofjhdh4orhjgb8p4s3&/topic,19740.0.html
Re: 034 Street Density Engine Mounts
« Reply #1 on: September 14, 2016, 08:06:24 am »
Any engine mount will increase NVH. There is no way around it.

Offline colesey

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 6
  • -Receive: 89
  • Posts: 1019
Re: 034 Street Density Engine Mounts
« Reply #2 on: September 14, 2016, 10:51:20 am »
Sure, I understand there will inevitably be compromises and that NVH is an area of subjectivity. I guess I am looking for an OEM+ type solution which does the least harm / evokes less strong views on NVH than some other models. As my car is now 10 years old, I am going through a process of upgrading original components as they wear out (eg dampers to VWR suspension kit / brakes to J hook discs / upgraded pads) with a view to tightening up responsiveness. As others have noted, this upgrade bug seems quite a rabbit hole to fall down!

Offline Paradox1

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 41
  • -Receive: 82
  • Posts: 1038
    • Email
Re: 034 Street Density Engine Mounts
« Reply #3 on: September 14, 2016, 11:50:21 am »
Why not just replace them with OEM mounts. Will be firmer than the worn mounts you have now???

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 670
  • Posts: 8228
Re: 034 Street Density Engine Mounts
« Reply #4 on: September 14, 2016, 12:11:20 pm »
Why not just replace them with OEM mounts. Will be firmer than the worn mounts you have now???

I did that, but they just don't last!  It's the gearbox one mainly.  It's utterly useless.  They had to make it really soft because the gearboxes in MK5s are proper agricultural and transmit too much noise and vibration into the cabin.  The engine side one isn't too bad.

As Rich said, move away from OEM and you will notice it unfortunately.  Just depends on what levels of NVH people are prepard to put up with, and bear in mind rubber stiffens the colder it gets, so a slight dash vibration over summer will get worse in winter.

VW just need to design the mounting system properly to begin with, such as a 4th 'snubber' mount at the front that sits in a cross member to eliminate the irritating back and forth rocking.


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline th3_f15t

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 66
  • -Receive: 183
  • Posts: 2676
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,101525.0.html
Re: 034 Street Density Engine Mounts
« Reply #5 on: September 25, 2016, 06:49:32 pm »
VW just need to design the mounting system properly to begin with, such as a 4th 'snubber' mount at the front that sits in a cross member to eliminate the irritating back and forth rocking.

Like they had in the mk2 Golf GTI you mean? :happy2:

I'm also thinking of using a complete set of 034Motorsport mounts like yourself, they seem the best solution when it comes to performance vs. NVH.

Moving over to Flickr, sorry for the broken picture links!

Offline colesey

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 6
  • -Receive: 89
  • Posts: 1019
Re: 034 Street Density Engine Mounts
« Reply #6 on: September 26, 2016, 07:01:30 am »
I asked 034 for customer feedback on cold weather performance and they claimed not to have received any complaints, with an OEM feel once past idle.  They quoted a break in period of 300-500 miles.

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 670
  • Posts: 8228
Re: 034 Street Density Engine Mounts
« Reply #7 on: September 26, 2016, 11:20:13 am »
Sounds good.  You can be our guinea pig!


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline raz469

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 12
  • Posts: 127
034 Street Density Engine Mounts
« Reply #8 on: September 28, 2016, 01:20:28 pm »
Ive had these on for like 2000+ miles now i think.
In all right honesty. Nowadays i feel like they are oem. Nothing inside make me feel like the car is any worse. No extra nvh with these. Even when they were new.
Before i can go recommending id prefer a second opinion. I have no complaints what so over. @ me if you want to know more guys.

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 670
  • Posts: 8228
Re: 034 Street Density Engine Mounts
« Reply #9 on: September 28, 2016, 04:41:37 pm »
Ive had these on for like 2000+ miles now i think.
In all right honesty. Nowadays i feel like they are oem. Nothing inside make me feel like the car is any worse. No extra nvh with these. Even when they were new.
Before i can go recommending id prefer a second opinion. I have no complaints what so over. @ me if you want to know more guys.

Which dogbone have you got to go with those?


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 670
  • Posts: 8228
Re: 034 Street Density Engine Mounts
« Reply #10 on: September 30, 2016, 11:29:03 am »
Hmmmm, this confirms some 'quality issues' I'd heard about with these mounts.   


Maybe the way forward then is to just fill the voids in the OEM mounts with some sikaflex (windscreen glue) or something?


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 670
  • Posts: 8228
Re: 034 Street Density Engine Mounts
« Reply #11 on: November 22, 2016, 04:28:47 pm »
In case anyone is interested in these, they're a bit cheaper on O34's black Friday sale - https://store.034motorsport.com/motor-mount-pair-density-line-mkv-mkvi-volkswagen-8j-8p-audi-2-0t-fsi.html#product_tabs_review

Anyone know of a UK reseller?

Importing them = $216 + $70 shipping + VAT & import duty (23% in total) slapped on at customs, = £230 x 1.23 = £282.  That's more than OEM ones  :grin:

The exchange rate absolutely sucks at the moment.
« Last Edit: November 22, 2016, 04:34:23 pm by Pudding »


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline colesey

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 6
  • -Receive: 89
  • Posts: 1019
Re: 034 Street Density Engine Mounts
« Reply #12 on: November 22, 2016, 04:57:25 pm »
I think Awesome sells 034.

Offline Neil 54

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 5
  • Posts: 73
    • Email
Re: 034 Street Density Engine Mounts
« Reply #13 on: November 22, 2016, 07:53:27 pm »
Awesome do have them on their site maybe they will  do Black Friday deal may get some myself if they do
https://www.awesomegti.com/shop-by-brand/034motorsport/034motorsport-density-line-engine-mounts-for-2-0tfsi-2-0tsi-engines/

Offline r5gtt

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 342
  • -Receive: 334
  • Posts: 5586
Re: 034 Street Density Engine Mounts
« Reply #14 on: November 22, 2016, 09:11:49 pm »
After seeing that video I'd be put off for life  :surprised:

I'm just filling the void  :grin: looks a little messy but now all cleaned up ready for install