All Things Mk5 > How to Guides / Troubleshooting

Retro fit leather seats.

(1/2) > >>

Kev:
Hi hope someone can help me out i wish to change my seats on my mk5 cloth trim to leather is it an easy retro fit to get the seat heaters to work.

RetroRaz:
Where are you based buddy. Ive done a few of these :)

Sent from my SM-G928F using Tapatalk

Kev:
Hi m8 im in halifax.

RetroRaz:
Quite far from me but can guide you.

Once you have the seats, you have to look under them to find a small control module box. Depending if you have the module under 1 or both seats then you buy the correct loom. The loom plugs under both seats, 2 ground points, i think 2 to the fuse box, one to the CECM and then 3 wires behind the heater controls. Oh and you will need a new heater panel with heated control switch.

Once fitted and wired, just activate it with VCDS ;)

DANBOY66:
cheapest place to buy looms ? i need 3  :grin:

Navigation

[0] Message Index

[#] Next page