Make a donation

Author Topic: Which control module for mfsw  (Read 11541 times)

Offline mikezs

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 12
  • Posts: 73
    • Email
Re: Which control module for mfsw
« Reply #15 on: December 23, 2016, 09:50:51 am »
Those are the lights you get when you disconnect the battery, just driving makes them clear normally.

If it doesn't clear you might have to do the steering angle adaption (like when you first installed the controller)

Offline axsweb

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 2
  • Posts: 81
    • Email
Re: Which control module for mfsw
« Reply #16 on: January 02, 2017, 08:53:25 pm »
Sorted the lights out. All controls working okay just the stupid menu button not working.


Sent from my iPad using Tapatalk

Offline ducman77

  • Always Involved
  • ****
  • Thank You
  • -Given: 59
  • -Receive: 54
  • Posts: 442
Re: Which control module for mfsw
« Reply #17 on: January 02, 2017, 09:57:05 pm »
Just jumping in here to send a big shoutout to @RetroRaz  :happy2:
I used your YouTube video to great effect when I was retrofitting a MFSW to my MK5
Thanks a million for the video buddy :happy2:

Offline RetroRaz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 193
  • Posts: 2813
    • Email
Re: Which control module for mfsw
« Reply #18 on: January 03, 2017, 12:08:24 am »
Just jumping in here to send a big shoutout to @RetroRaz  :happy2:
I used your YouTube video to great effect when I was retrofitting a MFSW to my MK5
Thanks a million for the video buddy :happy2:
No worries buddy. YouTube recently disabled the video due to some racism being thrown at me for no reason. But it can be enabled again.

Sent from my SM-G928F using Tapatalk


Offline Broomy

  • Always Involved
  • ****
  • Thank You
  • -Given: 18
  • -Receive: 2
  • Posts: 187
Re: Which control module for mfsw
« Reply #19 on: January 13, 2020, 04:08:18 pm »
I think I’ve figured out I need a ch module to match highline cluster, mfsw & cc as my AF module is midline. Do I need the separate harness? (5K0971584C)

Offline mikezs

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 12
  • Posts: 73
    • Email
Re: Which control module for mfsw
« Reply #20 on: January 14, 2020, 02:19:21 pm »
I think I’ve figured out I need a ch module to match highline cluster, mfsw & cc as my AF module is midline. Do I need the separate harness? (5K0971584C)

You will if it didn't come with the MFSW and you don't have DSG

Offline Broomy

  • Always Involved
  • ****
  • Thank You
  • -Given: 18
  • -Receive: 2
  • Posts: 187
Re: Which control module for mfsw
« Reply #21 on: January 15, 2020, 09:04:02 am »
I think I’ve figured out I need a ch module to match highline cluster, mfsw & cc as my AF module is midline. Do I need the separate harness? (5K0971584C)

You will if it didn't come with the MFSW and you don't have DSG

Perfect. Thanks a million  :happy2:

Offline Octoparrot

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 8
  • -Receive: 99
  • Posts: 972
    • Email
Re: Which control module for mfsw
« Reply #22 on: January 15, 2020, 11:53:42 am »
I believe that part number is for the mark 6. The part you need is 1K0971584C.

Offline RobC

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 20
  • Posts: 162
    • Email
Re: Which control module for mfsw
« Reply #23 on: January 16, 2020, 08:54:39 am »
I believe that part number is for the mark 6. The part you need is 1K0971584C.

It works in the Mk5 as well. Its essentially a cross over that supports both LIN 1.3 & 2.0 and so is used when retrofitting later steering wheels but believe it still works with the Mk5 MFSW etc.

http://wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions

Rob

Offline mikezs

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 12
  • Posts: 73
    • Email
Re: Which control module for mfsw
« Reply #24 on: January 16, 2020, 09:02:30 am »
I believe that part number is for the mark 6. The part you need is 1K0971584C.

It works in the Mk5 as well. Its essentially a cross over that supports both LIN 1.3 & 2.0 and so is used when retrofitting later steering wheels but believe it still works with the Mk5 MFSW etc.

http://wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions

Rob

It definitely does not fit, and I've got a mk6 harness if you'd like it for the cost of postage if you want to try it!

Offline RobC

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 20
  • Posts: 162
    • Email
Re: Which control module for mfsw
« Reply #25 on: January 16, 2020, 09:12:49 am »
I believe that part number is for the mark 6. The part you need is 1K0971584C.

It works in the Mk5 as well. Its essentially a cross over that supports both LIN 1.3 & 2.0 and so is used when retrofitting later steering wheels but believe it still works with the Mk5 MFSW etc.

http://wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions

Rob

It definitely does not fit, and I've got a mk6 harness if you'd like it for the cost of postage if you want to try it!

Apologies, I thought you were talking about the SWCM, not the harness. Ignore me!  :doh:

Offline mikezs

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 12
  • Posts: 73
    • Email
Re: Which control module for mfsw
« Reply #26 on: January 16, 2020, 09:25:21 am »
I believe that part number is for the mark 6. The part you need is 1K0971584C.

It works in the Mk5 as well. Its essentially a cross over that supports both LIN 1.3 & 2.0 and so is used when retrofitting later steering wheels but believe it still works with the Mk5 MFSW etc.

http://wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions

Rob

It definitely does not fit, and I've got a mk6 harness if you'd like it for the cost of postage if you want to try it!

Apologies, I thought you were talking about the SWCM, not the harness. Ignore me!  :doh:

Ah, yep. That CH module is the magic one that's cheap from china and supports highline mk5 and mk6. Defo need the Mk5 harness though, the connector plug for the MFSW controller doesn't quite reach!