All Things Mk5 > How to Guides / Troubleshooting

RFD and clean inlet valves

(1/1)

Mitch1980:
Fellas thinking of doing the rf delete kit but as I'm there should do the inlet valves but what method do you do to clean ? Any help apretiated

pudding:
http://www.repairingproducts.co.uk/product/carbon-off-oven-carbon-remover-cleaner-spray-19oz/

https://www.amazon.co.uk/gp/product/B00BCY5ST6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Make sure the cylinder you are cleaning is at TDC to stop crud dropping down into the cylinder.

Spray the carbon off onto the valves, leave for an hour, spray more on, leave for 10 mins.....then get scrubbing!

Navigation

[0] Message Index