All Things Mk5 > Members Rides
My little MK5 2.0TDI R-line build thread
Christiank:
See if you can track down one with same partnumber then :)
What else you want to upgrade on it? Got search ebay for a highline CECM - this will allow you to have LED footwell lights, ambients light with footwell lights, fog light conering lights, xenon, auto hazard light with hard breaking etc etc.
3C8 937 049 E - this is the one you should look for.
also track down MAX/highline door controllers so you can retrofit entry light, doorhandle lights, folding mirrors, puddle lights etc etc :)
Eighteen88:
--- Quote from: Christiank on August 03, 2017, 08:07:34 pm ---See if you can track down one with same partnumber then :)
What else you want to upgrade on it? Got search ebay for a highline CECM - this will allow you to have LED footwell lights, ambients light with footwell lights, fog light conering lights, xenon, auto hazard light with hard breaking etc etc.
3C8 937 049 E - this is the one you should look for.
also track down MAX/highline door controllers so you can retrofit entry light, doorhandle lights, folding mirrors, puddle lights etc etc :)
--- End quote ---
I'd like to upgrade all these eventually :wink:
Christiank:
--- Quote from: xionoulis on June 30, 2017, 11:17:01 pm --- :happy2: :happy2: :happy2:great job....the 3d cluster is all the money,,,,i am thinking too to make it....even to bring the car to uk in order to happen...i see that there a lot of people are good to electronics....
--- End quote ---
Hey mate. Just saw your reply. I'm not from the UK. So you don't have to go there to get a cluster like mine ;)
Christiank:
Should finaly find their place at the golf hopefully tomorrow or on sunday :) Looking forward to finaly getting this job done.
Christiank:
So took some time in the weekend to get some work done. Did start saturday with replacing my dog bone. The old one was cracked in the rubber bushing, so hopefully an improvement with the new one.
Removed the old wishbones, hubs, struts and springs. Replaced everything with the new parts along with new bolts and nuts everywhere.
if anyone is doing this swap remember to order Passat caliper carrier bolts. You can't re-use your old ones since the alloy hub is thicker than your old stock one.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version