All Things Mk5 > Mk5 General Area

MK6 clocks into MK5 - ABS Pump

<< < (2/6) > >>

shoaybmakda:
I've just checked and I have a Q revision module - 1k0 907 379 Q

Would this module be okay to install a black and white cluster?

The clocks that I am looking to fit are from a golf plus

Thanks

Christiank:
From what years is your mk5 build?
I think mk5 gti's that was build efter 8/2006 (MY2007) has an ABS unit that will work with the newer clusters.

shoaybmakda:
@Christiank my car is a 2005 build I think but it is registered as a 2007 as it is an import back into the UK from Dubai.

I read this thread which says it should be ok but I've been told by Alex that it's too old:

http://www.mk5golfgti.co.uk/forum/index.php/topic,93520.15.html

Christiank:
I think the Q version is fine? I have a MY2005 car with the "K" so I did the Mk60 to Mk60ec1 swap :)

didn't know that the Q revisions was fitted from that early on.. Good to know.
I think my mates GTI also has the Q version and he didn't have to change anything.

Shoduchi:

--- Quote from: Christiank on May 09, 2017, 09:22:16 am ---From what years is your mk5 build?
I think mk5 gti's that was build efter 8/2006 (MY2007) has an ABS unit that will work with the newer clusters.

--- End quote ---
No the mk5 need to be MY2009, so they have to have been built after 08/2008, like my GT Sport. My Ed. 30 is a MY2008 and still has the MK60 ABS pump.

My GT Sport came with a Q rev CAN Gateway and my Ed. 30 had a L rev CAN Gateway.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version