General > Product Reviews
VW Racing Big Brake kit product review
xht20:
Thanks for the advice. In 2 days i will receive the new kit from VWR and then i will look more closely to this. Now i have BBS CH wheels and i understood that they have conical seat
xht20:
Installed today the new kit, i did everything as they told me, torqued every bolt. Still has that wobble, but is not segnifiant as the first kit. Under harder acceleration at speeds beyond 120km/h the sterring vibrates.
I think i know what's the problem. I attached a picture of the bolts from BBS and the bolts that i received in the brake kit. You see the difference?
Poppa Dom:
Yes, you need to be running on the 60 degree bbs bolt not the radius bolt if running after market wheels. :happy2:
xht20:
I found out that H&R has 60 degree tapper bolts that are identical with the ones received from BBS, only that they have the lenght of the ones received from VWR. Tomorrow i will order them. Hope that this solves the problem :D
xht20:
today i changed the bolts with ones that has conic seat and it still has the same wobble. I don't know why. On the rear i have R32 brake setup with Zimmermann discs (tomorrow i will change them with OEM ones, it might be that the ones from rear are not good). Is there a chance that the front brake kit with the big one from rear are too much for the brake fluid pump?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version