Make a donation

Author Topic: DSG Torque Limiting  (Read 2744 times)

Offline GTION

  • Just Arrived
  • **
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 15
DSG Torque Limiting
« on: April 15, 2019, 09:32:29 pm »
Hi guys,

My GTI is stage 1 remapped pushing out 249bhp and a healthy 391nm (288 ftlb)

From what I read, the DSG gearbox has a software torque limiter of 350nm (258 ftlb)

My DSG software is stock and I have not gotten it tune, does this mean that its limiting my Torque or should these torque limiters have been increased/removed as part of the ECU remap?

Thanks


Offline GTION

  • Just Arrived
  • **
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 15
Re: DSG Torque Limiting
« Reply #1 on: April 22, 2019, 04:37:41 pm »
I think I found the answer to my question

Just incase anyone else is researching this topic; its group 122 measuring blocks in VCDS , block is called Transmission Status and shows whether Torque is being reduced or not :)

Offline GTION

  • Just Arrived
  • **
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 15
Re: DSG Torque Limiting
« Reply #2 on: April 27, 2019, 10:36:58 pm »


So i just did a data log with VCDS and when I accelerate it does indeed show a “Torque Reduction”

Can anyone please let me know if this Torque Limit should have been increased/removed by my tuner as part of the Remap?

Thanks

Offline Vintyd

  • Taking part
  • ***
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 47
    • Email
Re: DSG Torque Limiting
« Reply #3 on: May 22, 2019, 02:52:18 pm »
Well did you find out?  I think I seen somewhere before that the reduction is removed when the box is mapped