All Things Mk5 > How to Guides / Troubleshooting

Gearbox End Cap Leak

<< < (3/3)

pudding:
Did you check the gearshaft end float whilst you were in there?

Morrisey:
As it was under warranty, I didn't do it myself so couldn't check.

-Didn't the younger mk5s have a shim inserted from factory anyway? (sure I read that somewhere, sometime, or just made it up!)

Sent from my CLT-L09 using Tapatalk

pudding:
Almost right.....it was the mid 2007 onwards that got the shim from the factory.

If you don't 1st/2nd gear gear selecting issues (if it's a manual) and/or high rpm miss shifts then the end float is probably OK.

Navigation

[0] Message Index

[*] Previous page