Make a donation

Author Topic: Rattle at idle  (Read 5933 times)

Offline TheBALDpuma

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 3
  • Posts: 280
    • Email
Re: Rattle at idle
« Reply #15 on: November 09, 2019, 10:16:00 pm »
I did get this sorted, but didn't take photos sorry!

When you take the drivers side undertray off (8 plastic bolts and very simple) you can see the two lines going into the chassis rail, I've got a thick piece of folded foam at the distal end, and a piece of lagging just south of the drain hole. It's all very obvious when you get down there.