All Things Mk5 > How to Guides / Troubleshooting

Air Con Fans not kicking in from start

<< < (2/4) > >>

ljc19630:
Have tried as you explained. Not sure if I’m in the correct setting but pic below is what’s showing??




Sent from my iPhone using Tapatalk

FJB:
Here are the codes:

0 - Compressor on
2 - Off, Blower Fault
3 - Off, Pressure Low
5 - Off, Engine Start Not Detected
6 - Off, Control Panel Switch Econ Mode
7 - Off, Control Panel Switched Off
8 - Off, Outside Temperature Below 3 Degrees
10 - Compressor Supply Voltage Low
11 - Coolant Temperature High
12 - Turned Off by ECM
13 - Off, Compressor Voltage High
14 - Evaporator Temperature Too Low
15 - Coding incorrect
16 - Activating Signal Fault
17 - Faulty Pressure Sensor Signal

ljc19630:


Got them and also showing the measuring blocks for group 1,2,3 below. Looking ok????



Sent from my iPhone using Tapatalk

FJB:
It looks like your compressor is turned on. When you turn it on and off does the engine load change?

ljc19630:
Yep - revs drop when off and rise when on. Fans are now running as just did a full self test. Is there a way to test just the fans?Confused.com



Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[#] Next page

[*] Previous page