Make a donation

Author Topic: Dog Bone Mount Insert - Dash Vibrations - Resolved  (Read 1490 times)

Offline LC5F

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 16
  • -Receive: 79
  • Posts: 1110
Dog Bone Mount Insert - Dash Vibrations - Resolved
« on: October 01, 2020, 09:03:17 pm »
Installed a Superpro insert into my rattle free golf, it now has a vibration in the top of dash on passenger side...

So far I have only done approx 30 miles round town, will it quieten down?

Or is it pointing towards issues with the other mounts - with the vibration being on Left side I am thinking main gearbox mount would be a possible culprit.
« Last Edit: April 18, 2021, 03:52:21 pm by LC5F »

Offline mjmallia

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 515
Re: Dog Bone Mount Insert - Dash Vibrations
« Reply #1 on: October 02, 2020, 08:24:41 am »
Is this the round bush for the lower engine mount #4 in picture ?

Mine did not add a lot of vibration.  I also added/replaced #5, #30, #1, #2, on the front with little vibration that settled after a week of driving

https://www.powerflex.co.uk/products/Golf+Mk5+GTI+%26+R32-2778/1.html
Mike

South Coast

S3 8L ---- Golf Mk4 GT TDI ---- Lupo GTI ----  A4 B6 Sline ---- Golf Mk5 GTI

Offline LC5F

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 16
  • -Receive: 79
  • Posts: 1110
Re: Dog Bone Mount Insert - Dash Vibrations
« Reply #2 on: October 02, 2020, 03:37:33 pm »
Yes - number 4
I used PSB on the front end with no issues - hope this quietens down

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 670
  • Posts: 8228
Re: Dog Bone Mount Insert - Dash Vibrations
« Reply #3 on: October 09, 2020, 08:57:43 pm »
Installs urethane mount and wonders why NVH increases.

Urethane has no place on a road car except for gluing the windscreen in.


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline LC5F

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 16
  • -Receive: 79
  • Posts: 1110
Re: Dog Bone Mount Insert - Dash Vibrations
« Reply #4 on: October 10, 2020, 11:25:12 am »
Actually -
This is the 3rd car I have fully poly bushed the suspension on, and the first I have experienced internal vibration.
I have also partially fitted poly bushes to 3 of my other cars without vibration.

Only vibrations experienced with bushes were:
Ice hockey puck rear engine mount on my Mk3 Valver - works for the front mount, does not work on rear
OEM style Mk4 R32 solid rear control arm bushes - on older Golfs - this vibration dies down after 100 miles of driving.

The poly Dogbone insert appears to be a popular modification on the Mk5 - still wondering if this vibration is normal, or something else worn or even if it will go away after putting some miles on it.

Offline LC5F

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 16
  • -Receive: 79
  • Posts: 1110
Re: Dog Bone Mount Insert - Dash Vibrations
« Reply #5 on: April 18, 2021, 03:51:50 pm »
To close this off - 6 months and 4k miles later - it has stopped rattling

I suspect it would have stopped sooner, Lockdown has meant the furthest driven since October is a hand full of 40 mile round trips, otherwise it's just short 3 to 5 mile trips only 4 times a week.