All Things Mk5 > How to Guides / Troubleshooting

Fitment help needed

<< < (2/2)

Kierandewberry21:

--- Quote from: jaffa on February 11, 2021, 09:58:55 pm ---What are your wheel specs?


Sent from my iPhone using Tapatalk

--- End quote ---
I’m not exactly sure on offset but they’re 19 inch Audi rotors 8.5j and the ones that are less concaved


Sent from my iPhone using Tapatalk

jaffa:
If they are genuine rotors 19x8.5 should be et43 and you put a 10mm spacer they your at et33
It all depends how low you are and how much your rubbing

There is a screw mod you can do which is remove the screw that is holding in your arch liner and bend the tab so that it holds the arch liner in, from what I remember that’s normally the first point of rubbing

If your very low you’ll need 215/35/19 and rolled arches possibly camber

You could get away with 225/35/19 depending how low you are

It’s hard for me to remember as I have changed to srs tec wings and I’m on air suspension


Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[*] Previous page