All Things Mk5 > Members Rides

Black Pirelli DSG

<< < (3/5) > >>

Twistedandy:

--- Quote from: Shoduchi on August 18, 2021, 05:18:18 am ---
--- Quote from: Twistedandy on August 09, 2021, 06:34:47 pm ---I launched the car a couple of times this weekend - it’s a lot of fun and I was trying to get some experience to reduce the initial wheel spin. Any tips appreciated.

--- End quote ---

Don't use launch control. Just feed in the throttle progressively. Upgrade the front control arm rear bushes with anti-lift bushes and fit a dogbone insert bush to reduce engine movement.

--- End quote ---

Thank you, I’ll take a look at those bushes…

Twistedandy:
And it needs a thorough clean inside and out.

EnglandUK:
Lovely Pirelli, always here a soft spot for these.

Twistedandy:
Freshened up the front as the red beading was badly faded and went for sunshine yellow. Included the bottom lip and I think it looks fresh. Will get to the brake calipers for painting before the weather breaks - I hope.



Twistedandy:
Working on a reverse camera addition at the moment. Taking the inner trim off was done carefully, I’m hoping it’ll go back on just as easily.

I’ve mounted a small camera just above the rear licence plate and run the cable through a hole I drilled in the bumper behind the licence plate. The wires then run through a hole into the boot and I’m currently running a 12v live from the rear 12v socket for the relay. I’ve yet to find the live feed to the reverse light but have the trim off so shouldn’t take me too long. Planning to complete the wiring at the back end before running the RCA cable to the head unit..



Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version