All Things Mk5 > Members Rides

LED bulbs causing dash light

(1/2) > >>

Jons1001:
So I fitted some LED number plate bulbs but ever since the dash light bulb icon has stayed on. Looked online and it seems you need to use vagcom to code it out. Does anyone know if this would be possible with Obdeleven? Or a another way round it besides fitting standard bulbs. Cheers

GVK:
Guess you can just copy the VCDS procedure through OBDeleven, I've recently used the apps to code out seat belt warning, add emergency braking , altered the coming home light timer and all sorts using OBDeleven.

Jons1001:

--- Quote from: GVK on September 24, 2021, 05:31:04 am ---Guess you can just copy the VCDS procedure through OBDeleven, I've recently used the apps to code out seat belt warning, add emergency braking , altered the coming home light timer and all sorts using OBDeleven.

--- End quote ---

I found this from googling...

'Replaced them with regular bulbs or LED? If LED it needs vcds to disable "pulse width modulation for license plate lights" so it will disregard lower draw LED bulbs.
09 Central Electronics -> Byte 17, bit 7'

Hopefully be easy to find on OBDELEVEN

GVK:
You should have ammassed credits to use the apps .....press the 3 lines and go into car and apps.

Jons1001:

--- Quote from: GVK on September 25, 2021, 04:53:00 am ---You should have ammassed credits to use the apps .....press the 3 lines and go into car and apps.

--- End quote ---

Hi, this is the menu I have under 09 central electronics - Byte 17



Have also scrolled through but can't see anything relating to the command I posted above..

Anyone know a way around this without using vcds?

Edit: Just found this under apps, but says it for 2011 onwards vehicles :-(

Navigation

[0] Message Index

[#] Next page