Make a donation

Author Topic: No driver heated sideview mirror, no mirror blinker and no adjustment.  (Read 967 times)

Offline Thomas.98

  • Can't Read PM's Yet!
  • *
  • Thank You
  • -Given: 2
  • -Receive: 0
  • Posts: 3
    • Email
Hello,

I’m new to this forum, and hoping someone has had the same problem as me.
So I have an MK5 from 2006. All the “functions” on the driver side sideview dont seem to be working. No heating, no blinker, and no adjustments can be made. I checked te wires from the door to the interior, pulled back the rubber and i don’t seem to be damaged. I also removed the door pannel and measured the cabels with a multimeter. They seem to be fine. What was also weird that the multimeter gave 0,7 volts on the 2 wires going to the heated mirror. Could this be a faulty module (the one the window motor is attached to?) Any ideas how I can diagnose further?

Thanks in advance.

Thomas

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 670
  • Posts: 8228
Re: No driver heated sideview mirror, no mirror blinker and no adjustment.
« Reply #1 on: January 11, 2022, 04:25:37 pm »
Any fault codes with a scanner?  I could be wrong, but do some of the mirror functions go through the door controller?  If that is faulty, it might explain it.


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline Thomas.98

  • Can't Read PM's Yet!
  • *
  • Thank You
  • -Given: 2
  • -Receive: 0
  • Posts: 3
    • Email
Re: No driver heated sideview mirror, no mirror blinker and no adjustment.
« Reply #2 on: January 15, 2022, 04:17:41 pm »
Thank you pudding for your answer.

So I went out and bought the HEX-V2 scan tool.

I have got an error code on 42-Door Elect. Driver

    Address 42: Door Elect, Driver       Labels: 1K0-959-701-MAX3.clb
Control Module Part Number: 1K0 959 701 N    HW: 1K0 959 701 N
  Component and/or Version: Tuer-SG         005 0961
           Software Coding: 0000052
            Work Shop Code: WSC 00046 412 303104
                      VCID: 392F2FCDA5568143A0F-806C
1 Fault Found:

01811 - Supply Voltage for Door Controller; Drivers Side (J386)
            002 -- Lower Limit Exceeded

Is this a module that maybe frequently fails? If I can't find anything else, I'll go ahead and install a new one and post the results on this post.

Thanks

Thomas

Offline LC5F

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 16
  • -Receive: 79
  • Posts: 1110
Re: No driver heated sideview mirror, no mirror blinker and no adjustment.
« Reply #3 on: January 16, 2022, 04:48:28 pm »
That's just saying its not receiving the expected voltage - so hold off sourcing a replacement.

Broken wires in the rubber boot near the hinges are a common issue - have you checked these? - there is a nack to unclipping the boot, there is a latch at the top.
Also some people report unclipping the loom connecter under the boot and giving it a good squirt of contact cleaner can solve door issues.

Offline Thomas.98

  • Can't Read PM's Yet!
  • *
  • Thank You
  • -Given: 2
  • -Receive: 0
  • Posts: 3
    • Email
Re: No driver heated sideview mirror, no mirror blinker and no adjustment.
« Reply #4 on: January 17, 2022, 05:10:21 pm »
Thanks for the help. When I was tugging the wires to spray them with contact cleaner, the thin red/yellow wire snapped. This was the problem after all. Missed that one with the multimeter I gues. Made a DIY repair, everything working fine now.