All Things Mk5 > Mk5 General Area
Exceeding oil capacity
breeze:
Balance shaft delete (as in properly removing the shafts) makes sense, I think if I were tracking mine I would be disengaging them / removing them anyway.
Generally filling to max on the dipstick for trackdays is a good start.
Unless you are very quick / running slicks you are probably OK but honestly I’m not familiar with the MK5 in particular.
Assuming you have things like an uprated intercooler and a map that is standard or at least not pushing everything to the limit. I’d be careful about running one of the big power maps on a hot trackday.
pudding:
I've always shoved a 5 litre tub in at every oil change for 8 years and it's never done any harm, or smoked. I just can't be arsed to measure out 4.6 litres, or what ever it is.
5 litres is only a few mm above the max marker. I think the EA113s track better than EA888s in terms of PCV oil dumping. MK7s are really bad for blowing clouds of blue smoke on tracks.
Clarkj93:
--- Quote from: Pudding on October 31, 2022, 12:30:46 pm ---I've always shoved a 5 litre tub in at every oil change for 8 years and it's never done any harm, or smoked. I just can't be arsed to measure out 4.6 litres, or what ever it is.
5 litres is only a few mm above the max marker. I think the EA113s track better than EA888s in terms of PCV oil dumping. MK7s are really bad for blowing clouds of blue smoke on tracks.
--- End quote ---
Ah that was the reassurance I was looking for, May not doing much or anything at all and may be a non existent issue but if its no extra cost and helps me sleep a little easier then why not. Yeah I've noticed little talk about issues with these in standard form but have heard afew say catch cans and such are a necessity for mk7's on circuit.
pudding:
I don't know if extra oil will help with oil surge on track, but it certainly doesn't hurt it in terms of over filling :happy2:
I've never even seen a baffled sump for MK5s?! The oil pick up is barely any lower than the balancer/pump assembly, so that bulky piece sat in the oil will help reduce surging on corners.
MK7s have a more open sump as the balance shafts are in the block higher up I believe, so more room for the oil to slosh about into the primary oil separator, which then finds it's way into the upper PCV, and then dumped into the intake :grin:
bobby_fodge:
I've done the full balance shaft delete jazz and I run a mocal external oil cooler.
I end up need to add about 5 something litres to get the dipstick to show near max.
I guess the oil should be in a better condition for longer as it won't get as hot and degrade as 4.6 litres would.
Could you weld some baffles into the sump if you plan on slick and stuff?
Navigation
[0] Message Index
[*] Previous page
Go to full version