All Things Mk5 > How to Guides / Troubleshooting

A little help identifying a vacuum hose

(1/3) > >>

DrDroopy:
Hi all, I'm having trouble identifying this vacuum hose highlighted with the red lines, I was wondering if anyone can help?




As you can see from the tape, I found a crack where the pipe connects to the nipple, while trying to find a part number of the pipe it started hissing, then popped off  :grin:. One end goes off to the right side of the engine block, the other end goes off under the wiper/scuttle tray. I don't think it's the brake booster, so I'm a little at a loss as to what it is as I can't find a part number on the hose and I'm loathed to mess with it more incase it brakes off completely.

Thanks!

mjmallia:
That is the brake vacuum pipe

mjmallia:
1K2612041K

rotate image 180 degrees for correct orientation

Clarkj93:
Mine broke off, not sure for how long but never noticed anything. I had a misfire at the time because of a dead injector so could have hidden the symptoms. I just put a samco silicone vacuum hose on, cost about 8 quid or so. Been on over a year now with no issues. Not that there is anything wrong with the genuine part, just a nice easy cheap fix that worked great.

DrDroopy:

--- Quote from: mjmallia on November 30, 2022, 01:39:51 pm ---1K2612041K

rotate image 180 degrees for correct orientation
[/url]

--- End quote ---

I think that's the other half of the pipe, as seen here;



This female end of the pipe is OK, it's the male hose that pushs into that end which is broken, maybe you can get both sections as one part?



--- Quote from: Clarkj93 on November 30, 2022, 01:45:57 pm ---Mine broke off, not sure for how long but never noticed anything. I had a misfire at the time because of a dead injector so could have hidden the symptoms. I just put a samco silicone vacuum hose on, cost about 8 quid or so. Been on over a year now with no issues. Not that there is anything wrong with the genuine part, just a nice easy cheap fix that worked great.


--- End quote ---

Thats the one :D mine has cracked the same way, the last few wiggles finished it off. I don't have any silicone hose, but I don't mind fitting an OE part, I just need to find the correct part number.

Navigation

[0] Message Index

[#] Next page