All Things Mk5 > Mk5 General Area

Rough Starting Problem when cold

<< < (2/2)

GreigC:
Out the two it’s most likely an injector. It’s not a huge job but certainly ain’t small… there is few guides online mainly YouTube you can gauge yourself the size of the job. If you take the injectors out you can send them off to have them flow tested/refurbished. Then refit with new seals.

MattC:
My car had sticky runner flaps and made cold starts a bit rough, wouldn't actually start unless I turned the key to ignition and waited a few seconds before cranking but started every time.

If you don't care about coding, you just need the OBDEleven device. The free plan let's you scan and observe live data.

Navigation

[0] Message Index

[*] Previous page