All Things Mk5 > Mk5 General Area
Some Help Broke Down :(
GVK:
Can see the valve to piston contact on top of the pistons!
dazza:
--- Quote from: GVK on September 10, 2023, 07:42:47 pm ---Can see the valve to piston contact on top of the pistons!
--- End quote ---
this?
Also all the intake valves have some skuffed spots.
GVK:
Yep - Are the cams out of the head? If so put some petrol around the valves to see which ones leak.
Can see most of the inlet valves are bent from the pics but they all need removing to check properly
dazza:
--- Quote from: GVK on September 10, 2023, 08:41:30 pm ---Yep - Are the cams out of the head? If so put some petrol around the valves to see which ones leak.
Can see most of the inlet valves are bent from the pics but they all need removing to check properly
--- End quote ---
I have not taken the cams out. Can this be done without removing the cam adjuster? I lent my locking tool and socket to some members and never had it back :sad1:
GVK:
Not sure as never done the job on a TFSI personally.
They'll need removing and the rocker assemblies checking for damage too.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version