All Things Mk5 > Mk5 General Area
Some Help Broke Down :(
skkane:
18/19 is what we did when we put it back together. We had no locking tool to check but it turned out to be spot on.
dazza:
:sick: :sick: :sick: :sick:
With 18/19 link method it's worse
When I did 19/20 links
Why is the 18/19 link method not working?
skkane:
Damn, that looks way worse. Only things I can think about are the actual camshaft install into the head, the locking tool should slide in there without any force or wiggling if all is set properly. Either that or the timing belt side, are you certain that it's on spot? Here's two photos of how my cam positions looked with the current timing I have.
dazza:
--- Quote from: skkane on November 17, 2023, 09:40:37 am ---Damn, that looks way worse. Only things I can think about are the actual camshaft install into the head, the locking tool should slide in there without any force or wiggling if all is set properly. Either that or the timing belt side, are you certain that it's on spot? Here's two photos of how my cam positions looked with the current timing I have.
--- End quote ---
Thanks for the pics
The belt side looks good.
Even when the head was off i could only get the locking tool in at 18/19 links with a lot of wiggling.
I suppose i will set back to 19/20
dazza:
Now it's back to 19/20 pins
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version