All Things Mk5 > How to Guides / Troubleshooting

Gear selector tight (side to side)

<< < (2/2)

GVK:
That's one of them, if you take the 13mm nut off the centre of that linkage where it goes into the gearbox (cables removed too) you'll be able to strip it off the car.

I wonder if it is the actual gear selector that goes into the gearbox where the (rusty in your case) 13mm nut goes onto the top (if you take the 13mm nut off be careful when re-tightening it's easy to snap the shaft!)

While the linkage is removed you can check the side-side cable is not tight too.

Been along time since I messed with those linkages I'm not sure which cable does the side to side and which is the fore-aft!

maxamplitude10:
Thanks GVK I'll take another look tomorrow, thanks for your advice :happy2:

Navigation

[0] Message Index

[*] Previous page