All Things Mk5 > How to Guides / Troubleshooting

DV Fitting

<< < (4/7) > >>

j46ger:
cheers edd

Britishlion:



Is there a How To guide for doing this yourself

for a GTI !

vRS Carl:
No but it's easy enough to do Stefan

Just put car on Ramps/Axle Stands
Remove under tray
Turbo is on rear drivers side of the engine. DV is attached to that.
Remove 3 bolts holding it in. Replace with new DV and then refit under tray (make sure you reconnect the elec connector)

Job done. Will take around 45-60 mins to do yourself.

Britishlion:

--- Quote from: vRS Carl on July 21, 2010, 12:23:29 pm ---No but it's easy enough to do Stefan

Just put car on Ramps/Axle Stands
Remove under tray
Turbo is on rear drivers side of the engine. DV is attached to that.
Remove 3 bolts holding it in. Replace with new DV and then refit under tray (make sure you reconnect the elec connector)

Job done. Will take around 45-60 mins to do yourself.

--- End quote ---


Guess what i'm doing Saturday !


Thanks Carl

vRS Carl:
Just make sure you have the Correct tools.

If you get stuck give me a bell and i'll talk you through it :happy2:

Navigation

[0] Message Index

[#] Next page

[*] Previous page