All Things Mk5 > How to Guides / Troubleshooting
How to Relocate K03 DV to K04 Position Tutorial
vRStu:
1J0 973 822 A 2 Pin Brown Flat Contact Housing 1
1J0 973 722 A 2 Pin Black Flat Contact Housing 1
000 979 134 Single Wire 1.0mm 2
000 979 133 Single Wire 1.0mm 2
N 107 324 01 Corrugated Pipe 4.5mm (M) 2
N 906 819 01 Corrugated Pipe End Piece 4.5mm 2
Sie:
Brill thank you. Did it all cost much?
Sie
vRStu:
Not an enormous amount, no.
You'll also need some decent cable to make the length.
vRSAlex:
With the wiring on mine and the ones I do at work, you just need to pull with wiring back to the start of the coilpack wirings plastic housing. That gives the perfect length to route the wiring round the right side of the engine and onto the DV.
Using a wiring extension is faster and easier, but costs more and imo doesnt look as neat/oem.
vRS Carl:
--- Quote from: BDMAlex on January 23, 2011, 12:56:23 pm ---With the wiring on mine and the ones I do at work, you just need to pull with wiring back to the start of the coilpack wirings plastic housing. That gives the perfect length to route the wiring round the right side of the engine and onto the DV.
Using a wiring extension is faster and easier, but costs more and imo doesnt look as neat/oem.
--- End quote ---
Depends how neat & OCD you are :P
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version