All Things Mk5 > Performance Modifications

BIG TURBO going on next weekend !

(1/2) > >>

gillm:
mu gt28 kit is going on next weekend , im fitting it with some mates . we are all very cable of doing the swap but im wondering if there is anything im going to forget / need help with ? wiring with std dv set springs to mind , im driving the car off boost up to west tuning next tuesday which is about 40 mins away so thats not too much of a issue . new seals being fitted are

new injector seals
new downpipe / turbo gasket
new exhuast manifold gasket
new inlet manifold gasket
new exhuast manifold nuts
new turbo oil pipe seals (on order)


can you think of anything else ?

gillm:
Anyone

danishmkvgti:

--- Quote from: gillm on August 23, 2010, 06:01:38 pm ---Anyone

--- End quote ---

sounds great, but unfortunately i can't help, i have no experience with this.

QD MBE:
Hey up bud,

Have you thought about the different locations of the oil and water lines?  Don't forget the G12 Coolant, as I assume you will have to drop the Coolant level.

I replaced the KO3 on my old MK4 and made sure I had spare exhaust manifold studs and all coolant and oil line banjo union copper seals.

Have you got a good set of Stud/nut removers should you get a sheared/rounded one?  Sounds like a good days work, hope it all goes well. 

gillm:
Yeh I have g12 no studs tho so will order them up now

Navigation

[0] Message Index

[#] Next page