All Things Mk5 > Mk5 General Area

Pictures of Boot Builds

<< < (5/5)

Snoopy:
A push-pull configuration of two or more fans using a thermo switch control and you normally use ducting to the stail air outlets in the boot to feed and extract air.  :wink:

Hurdy:

--- Quote from: Snoopy on February 07, 2009, 02:01:56 pm ---A push-pull configuration of two or more fans using a thermo switch control and you normally use ducting to the stail air outlets in the boot to feed and extract air.  :wink:

--- End quote ---

Gotcha.  :happy2:

I bet there are a fair few who would cut the corners though and then regret the build without proper cooling. :rolleye:

Snoopy:
Most 'good' amplifiers have a thermo cutoff in them so all they should do is simply switch themselfs off until they cool enough to a level it is set to reset at.
You do often find as you said people do not cool them and it all depends on the amplifier make model and design how hot it runs they often can get away with it.

Navigation

[0] Message Index

[*] Previous page