All Things Mk5 > How to Guides / Troubleshooting

Interior "kneepad"

(1/2) > >>

liver:
Im wanting to know if its possible to remove the 'kneepad' parts on the interior and if so how are they removed?
heres a pic of the area in question.
i know osir do a carbon part but not sure if they goes over the top of the original or if the original is removed and replaced by the carbon.



cheers for any help

Richn83:
That bit is easily removed, you need to be careful not to break the retaining clips which are plastic, and its removed by prying it out with a trim removal tool (or very carefully with a flat headed screw driver and some protection)

liver:
so its not held in by any torx screws or anything, is it just two clips per side?

Garth:
As far as I can remember, it is only clipped in place, but I had to remove half the centre console to get those bits loose enough to come out!

liver:
ive already got half out and sure the clips can be seen, will give it a bash


cheers for the information people

Navigation

[0] Message Index

[#] Next page