All Things Mk5 > Members Rides
vRSAlex's Octavia vRS Estate - New Mods On
Tfsi_Mike:
--- Quote from: vRSAlex on January 04, 2012, 04:36:42 pm ---You really only need two 35mm hose clips and one 45mm iirc. Remove the dv housing and bracket too.
--- End quote ---
Have only received one small hose clip will have to pick one up in the morning.
If you use the car would you mind measuring the reducer to show how much length you've trimmed off each end, I'm going to trim it tonight if possible to save time fitting. :notworthy:
s3dubbin:
Alex i have just bought a 2nd hand super size forge it came with the pipework running from the intake but nothing else. See the little vac pipe (maybe 6mm) that runs to the inlet mani what is the attatchment on the end of the manifold that i would need, will i just phone forge and say i need vac/boost hose and the attatchment? Thanks, Stevie.
Tfsi_Mike:
--- Quote from: s3dubbin on January 06, 2012, 09:00:01 am ---Alex i have just bought a 2nd hand super size forge it came with the pipework running from the intake but nothing else. See the little vac pipe (maybe 6mm) that runs to the inlet mani what is the attatchment on the end of the manifold that i would need, will i just phone forge and say i need vac/boost hose and the attatchment? Thanks, Stevie.
--- End quote ---
It's just thier latest DV fitting kit, they'll know what your askin for :happy2:
Wanted to fit my supersize DV yesterday but the wind was horrendous :sad1:
Trickiest bit for me by the looks will be getting the original DV bracket off.
vRS Carl:
Is this the bracket that hold the OEM DV to the Intake Manifold? If so you just need a small socket set and iirc a T30 torx bit to undo the 2 screws from underneath.
Tfsi_Mike:
--- Quote from: vRS Carl on January 06, 2012, 09:49:11 am ---Is this the bracket that hold the OEM DV to the Intake Manifold? If so you just need a small socket set and iirc a T30 torx bit to undo the 2 screws from underneath.
--- End quote ---
Yes that's the one. Alex says 10mm to take the nuts off & the studs ussualy come out too.
From memory the end of the stud won't undo (on mine?) with a Torx bit. Will find out later today
After seeing the Valve on Alex's Octy the other day it is Supersize! :party:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version