All Things Mk5 > Members Rides
vRSAlex's Octavia vRS Estate - New Mods On
vRS Carl:
Mine might have been T30 as it was a retro fit to relocate the DV on the last Octy i had.
vRSAlex:
Most of the k03s cars had t-30 bolts, but the later cars had a stud held on with a 4.5mm socket with the bracket held onto the stud with a nut.
Tfsi_Mike:
--- Quote from: vRSAlex on January 06, 2012, 01:03:36 pm ---Most of the k03s cars had t-30 bolts, but the later cars had a stud held on with a 4.5mm socket with the bracket held onto the stud with a nut.
--- End quote ---
Today's mission is to get those two nuts off.
Have you noticed any more improvements on the clutch bleed valve mod Alex?
Tfsi_Mike:
Alex,
Could the fact you have different software prevent your car from stalling with nothing plugged into the solenoid?
Tightened the hose clips up further, didn't help. Will strip the top of the DV when it's day light to check the o ring
s3dubbin:
Just spoke to forge to order the supersize dv kit, i have the valve but need the rest. They could not understand how i could run the s.size dv on the 2.0tfsi, they had never heard of it before?? They kept saying yeah the 1.8t, no i promise you it is the 2.0t. If its the 2.0t then you will need to run a different map for the s.size. :confused: I have used your pic to send to them it fitted with the little inlet mani adapter. Stevie.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version