All Things Mk5 > How to Guides / Troubleshooting

VW Golf Mk5 door handle lighting installation instructions.

<< < (3/6) > >>

vRS Carl:
It was fine mate  :happy2:

I was just after hearing what the car sounded like with Engine mounts fitted. As the wife is the one who drives my Blue Bullet the most  :sad1: if it was too intrusive she would hate it.

What make mounts do you have btw and are they road or race mounts (as i hear race mounts are a lot harsher noise/vibration wisre than the road ones)?

RedRobin:

--- Quote from: vRS Carl on October 19, 2010, 12:11:32 pm ---
What make mounts do you have btw and are they road or race mounts (as i hear race mounts are a lot harsher noise/vibration wisre than the road ones)?


--- End quote ---

....My mounts are VWR 'Fast Road' mounts - Full set.

Linky to review:    http://www.mk5golfgti.co.uk/forum/index.php/topic,6086.0.html

M44NTU-3.2:
ive done this, but used small leds in the botton of the door handle, just lights up the whole cubby hole

remix:
hi..

I made this mod too in my Golf Mk5, 4 doors .

In the front doors i connected the wires in 32 pins connector..  I use pin 4 and pin 14 and coded with vag-com.

It works great !!  when i turn all lights off the handle lighting stay on for more 2 minutes..   :happy2:

But i have a problem in back doors..   

In back doors i have 18 pins connector and i dont now the pins to connect the wires to the lights work like front ..  :sad1:


Anyone know what are the pins ???

I have this option in vag-com to the back doors



my 18 pins connector :



some pictures of the front doors :








Thank for the help and sorry my english..  :happy2:

Eddie-NL:
Hi
the door controllers in the back are the same as what I have, and are basic.
When I added this to my car I used the wiring loom for the electric window switch lights and joined two wires with a flat 2 pin connector male and female on the wires from the illuminated handle

Ed

Navigation

[0] Message Index

[#] Next page

[*] Previous page