All Things Mk5 > Mk5 General Area
ETKA version (revisions)
JPC:
ah if you get the 726-731, gimme a shout! ;)
JPC:
btw...good luck installing the updates. i had to do them one by one and it was soul destroying!
182_blue:
--- Quote from: JPC on February 13, 2009, 03:14:09 pm ---btw...good luck installing the updates. i had to do them one by one and it was soul destroying!
--- End quote ---
i have them downloaded, how did you apply them ?, i have over 100 to apply :surprised:
SteveP:
^^^ x 2
I have just obtained the updates and and installed the program :happy2:
182_blue:
Steve, mine came with there's instructions, i just wondered if there's an easy way
Updates Etka 7 from build 710 to 731.
Step 1 - Unrar
Step 2 - Open ETKA7 Updates directory
Step 3 - You now have 4 folders that need to have the contents moved to
the proper directory.
Open & Move all files in each directory to the following paths.
Audi.Updates.711-731 -> C:etkaDATAAUUpdate
Seat.Updates.240-260 -> C:etkaDATASEUpdate
Skoda.Updates.246-266 -> C:etkaDATASKUpdate
VW.Updates.711-731 -> C:etkaDATASKUpdate
Step 4 - Now comes the part where you will sit through a bunch of update
installs. Please know in advance this will take aproximately about
30 minutes or more in time depending on your system and patience!
Once you start the first update it will continue to install each
update one after the other so be patient and install everything.
** The password you need to install is case sensitive so copy it
exactly as shown below and paste it each time the updates ask
you for it. IF THE SETUP PROGRAM STYLE CHANGES, THE PASSWORD
ALSO CHANGES.
Passwords: AKTEForum.TK
avaf
Go to C:etkaDATAAUUpdate
Launch eupdAU711D.exe and continue the install until its
finished and it will automatically launch etka.
Close etka and restart it.
You've now patched your etka release 7.0 from build 711 to
Updates Etka 7 from build 597 to 710.
Step 1 - Unrar
Step 2 - Open ETKA7 Updates directory
Step 3 - You now have 4 folders that need to have the contents moved to
the proper directory.
Open & Move all files in each directory to the following paths.
Audi.Updates.598-710 -> C:etkaDATAAUUpdate
Seat.Updates.127-239 -> C:etkaDATASEUpdate
Skoda.Updates.133-245 -> C:etkaDATASKUpdate
VW.Updates.598-710 -> C:etkaDATASKUpdate
Step 4 - Now comes the part where you will sit through a bunch of update
installs. Please know in advance this will take aproximately about
2 HOURS or more in time depending on your system and patience!
Once you start the first update it will continue to install each
update one after the other so be patient and install everything.
** The password you need to install is case sensitive so copy it
exactly as shown below and paste it each time the updates ask
you for it. WHEN THE SETUP PROGRAM STYLE CHANGES, THE PASSWORD
ALSO CHANGES.
Passwords: AKTEForum.TK
avaf
Go to C:etkaDATAAUUpdate
Launch eupdAU598D.exe and continue the install until its
finished and it will automatically launch etka.
Close etka and restart it.
You've now patched your etka release 7.0 from build 597 to 710.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version