All Things Mk5 > Performance Modifications

Milly R32 Style - Exhaust Tone

<< < (2/3) > >>

Betty02:
Been looking at the price of the milly and trying to compare it to the blueflame -

http://www.blueflameperformance.com/cars_english/blueflame-car-exhausts-1/vw/golf-mk5-gti-edition-30-2004/vw-golf-mk5-gti-edition-30-2004-on-76mm-rear-tail-pipes-twin-4-00-trims-with-brace-bar-bftrim010-r32-style-centre-exit.html

This is a twin 4" though, but the price is considerably cheaper, guessing this price is just for a backbox and will bolt straight on? What noise/performance or any issues with the above?

Any pictures of one would be appreciated
Thanks

Top Cat:

--- Quote from: Betty02 on January 14, 2011, 12:18:59 pm ---Been looking at the price of the milly and trying to compare it to the blueflame -

http://www.blueflameperformance.com/cars_english/blueflame-car-exhausts-1/vw/golf-mk5-gti-edition-30-2004/vw-golf-mk5-gti-edition-30-2004-on-76mm-rear-tail-pipes-twin-4-00-trims-with-brace-bar-bftrim010-r32-style-centre-exit.html

This is a twin 4" though, but the price is considerably cheaper, guessing this price is just for a backbox and will bolt straight on? What noise/performance or any issues with the above?

Any pictures of one would be appreciated
Thanks

--- End quote ---

Not to sure what it is you would be buying there, a cat back is normally a lot more than that.  :chicken:

In reagrds to the blueflame versus milltek dilemma. I have a turbo back centre exit Blueflame and it is loud at times, especially when slightly  hot it goes quieter when blasting round a track for some reason. If you want a quiet system i would say avoid Blueflame, but the problem with the Milltek R 32 style one, is the quality is sh*t compared to the blueflame one it hangs down below the valance on a funny angle showing off all the rusty bits and is really heavy. Ask JoesGTI he is happy to admit that his was poor compared to the Blueflame. But the Milltek one can be nice and quiet when you want it to.  :happy2:

Gtiain:
Can that blueflame setup (£160?) be integrated into the standard gti setup? As I want to get a proper system (eventually when I've got enough money!) but thought this could tide me over untill then as id like to get the r32 rear fitted.

Top Cat:
I think that is just a price for the tips, if you wanted the centre exit you would ned a cat back system to bolt onto your original GTI one.  :happy2:

big al:
I have given up on my Milltek for exactly the same reason as Joe did , the back hangs down so far,have heard that there is a shallower milltek one that you can get, but not seen any yet.
I have a pipeworx high flow one, bought  it off an edition 38 member for £150 (though they are £450 new) and it sounds great, though may put some better tailpipes on it. It fits to my milltek downpipe without any issues, and isn't overly loud, but does sound quite powerful when you want it to, and also when reversing onto the drive late at night  :ashamed:

Navigation

[0] Message Index

[#] Next page

[*] Previous page