All Things Mk5 > Sat Nav and Car Audio
Tutorial - How to Update RNS-510 Firmware. ***New Links & Firmware*** 19/02/12
vRS Carl:
You generally can't go from a 1xxx firmware to higher than 268x firmware. You can go from 268x to 38xx or higher.
You don't need to do anything with VCDS as none of the coding is changed (assuming it is correct in the first place).
You can find out your firmware if the test menu is enabled. Press and hold setup for around 30secs and you will get to the developer test menu. In there you will find the part no, sw version and map version info.
If it's not enabled you can use VCDS to enable it. Go into block 37 ---> Adaptation -----> channel 50 and enable developer test menu. Save it and do a soft reset of the Nav and it will be available.
minboshim:
Thank you so much. Much appreciated. I'll update to 2XXX first and then proceed to update through 3XXX with the links found at the beginning of this post.
kristian86:
You have any answer to my question? Can i safely upgrade my orginal B unit upgraded to 3810 (now it looks like a D unit) to 4020 FW?
vRS Carl:
If you have upgraded to 3810 then yes in theory however you may find some bugs due to it being older hardware.
Pashka:
Can anyone reupload 3810 firmware to another site? This one is very slowfly and turn off download in the middle. Thanks.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version