All Things Mk5 > Sat Nav and Car Audio
Tutorial - How to Update RNS-510 Firmware. ***New Links & Firmware*** 19/02/12
SeanyK:
Carl, many thanks for this mate, I have downloaded the latest and will run it next weekend after installing the RNS.
Sean :happy2:
lukasvaly:
Hy! thanks for the tutorial!
Do anywone know hot to activate dvd playback in motion whit this version of firmware 276X?
I tried the combination of buttons i + < > and don`t work ,any ideas?
wellhuw:
this is really helpful!
I have just loaded on the http://www.megaupload.com/?d=VD5REKW1, so hopefully I won't have a flat battery again in the morning.
Do you know how to tell if the batter drain issue is resolved, other than just waiting?
Should the unit take longer to boot up when first turned on after being off for a certain amount of time?
vRS Carl:
--- Quote from: lukasvaly on March 19, 2011, 09:38:33 pm ---Hy! thanks for the tutorial!
Do anywone know hot to activate dvd playback in motion whit this version of firmware 276X?
I tried the combination of buttons i + < > and don`t work ,any ideas?
--- End quote ---
Unfortunately the key press unlock was removed from 268X onwards. It now has to be programmed in using special software. This can't (at the moment at least) be done any other way than connecting a laptop to the car. The only person i know on here who can do it is Darren (MortyGTTDi)
vRS Carl:
--- Quote from: wellhuw on March 23, 2011, 09:19:48 pm ---this is really helpful!
I have just loaded on the http://www.megaupload.com/?d=VD5REKW1, so hopefully I won't have a flat battery again in the morning.
Do you know how to tell if the batter drain issue is resolved, other than just waiting?
Should the unit take longer to boot up when first turned on after being off for a certain amount of time?
--- End quote ---
It will take longer to start up if it has been left for a few days (mine always does)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version