All Things Mk5 > Sat Nav and Car Audio
Tutorial - How to Update RNS-510 Firmware. ***New Links & Firmware*** 19/02/12
CDPDesign:
Hi All,
I'm new to here, and trying to get my head round the RNS510 and it's capabilities!!!
I have a version b (1T0035680B), and I have managed to update the maps from 6835 to 7388 on hardware version H11, Software version 1200.
At the moment, if I press the button at the top right I get a message saying 'The guidance system is inactive'
Also, if I try to get the DVD in motion over-ride to work (top right button then setup) it works, but after about 5 seconds the setup screen comes on. If I press cancel, it comes up with the message to say the vehicle is in motion and the screen won't work...
A few questions:
1) Does anyone know what firmware this unit will take?
2) How do I get the guidance system to be active?
3) is the dvd issue a fault or is there a work around?
4) can ther video in motion be activated with Vag-Com?
I have the proper RossTech Vag Com sso I can alter whatever is necessary...
Any advice / assistance would be greatly appreciated...
ps.. anyone in east yorkshire - vag com services available FOC - pm for assitance!
Thanks in advance!
stealthwolf:
--- Quote from: CDPDesign on April 09, 2011, 12:07:05 pm ---At the moment, if I press the button at the top right I get a message saying 'The guidance system is inactive'
--- End quote ---
That button can be used to speak the last instructions. If you've not programmed your satnav, then it doesn't have any instructions! Set it up to go on a journey and then press the button at various points and you'll see what it says.
--- Quote from: CDPDesign on April 09, 2011, 12:07:05 pm ---2) How do I get the guidance system to be active?
--- End quote ---
Program it! Tell it to go somewhere!
--- Quote from: CDPDesign on April 09, 2011, 12:07:05 pm ---4) can ther video in motion be activated with Vag-Com?
--- End quote ---
No but I think mortygttdi has a tool to fool the unit into thinking the "safe speed" is higher so it doesn't cut out.
bigdave146:
--- Quote from: bigdave146 on April 05, 2011, 11:37:33 pm ---What would happen if I did the 2760 firmware update and then left the Navi software to update, and then I started the car and drove it before it finished ? Would this stuff up the upgrade ?
Dave
--- End quote ---
Did the upgrade no problems. Now just have to get the 7.1 maps....
FYI I have a Golf TSI 60 plate, Dec 2010 with RNS510.
chris s:
Hi - did people use the regular download on the link to 2760 firmware and have it work successfully?
vRS Carl:
Yes Chris the regular download will work fine :happy2:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version